C o lo u r T h e m e 3 - T u n e a b le Wh i te DM X C o n tro lle r
U s e r M a n u a l
5 .2 - 3 No v e m b e r 2 0 1 6
P a g e 3 o f 8
Introduction
The Tuneable White version of the Colour Theme Controller is a DMX show generator with a simple
and intuitive user interface, specifically designed for
use with Digilin’
s LDMX-PWM-2-VW to control
installations of tuneable white LED fittings. Tuneable white fittings allow the user to set the colour
temperature through a set range of values, thus allowing the user to set the mood and ambience of
an area by controlling the colour temperature of the white light.
Additionally, the Colour Theme Controller has a serial interface which provides an interface to PC or
any number of lighting control networks.
Specifications
Physical
U n its
Plate Dimensions
76 x 116 x 11
mm
Dimensions Including Knob
76 x 116 x 23
mm
Weight
100
g
Inputs
U n its
Voltage
12 -24
VDC
Current
mA
Fuse
100
mA
Communications
U n its
DMX Channels
2
DMX Start Address
Adjustable
–
Default 1
DMX Load
0.25
Standard Devices
Serial Baud Rate
9600
bps
Installation
Wiring
The Colour Theme has a single 4 way screw
terminal block, as shown in
Figure 1
. This
provides connections for the power and data.
The positive voltage input should be between
+12V and +24V. This cable can be secured to
the cable mount point using a cable tie.
If using the serial interface, connect the unit
using a null modem cable (refer to Appendix A.
RS232 Null Modem Cables Using RJ45
Connectors to see how these cables are
constructed) to the chosen host.
V+ D+ D- Gnd
RJ45 serial
interface
connector
Configuration
mode jumper
Cable
Mount
Point
Figure 1 Connections on the Colour Theme Controller
