DK50018
-
Bluetooth accessory and switching decoder Bluetooth connection
DK50018
-
Bluetooth accessory and switching decoder
www.digikeijs.com
*R
-
Bus, B
-
Bus are registered trademarks of Modelleisenbhan GmbH. XpressNet and RS
-
Bus are registered trademarks of Lenz 16
www.digikeijs.com
Load preset on all outputs
The load preset on all outputs option is used to select a preset and load them on all out-
puts. This would mean that all outputs will be configured exactly the same way based on
the preset selected. Within the load preset on all outputs, you can also set the start ad-
dress of the device and open the switchboard.
You will find more information on the differ-
ent presets further in this document.
Load preset per output
The load preset per output option can be used to load a specific preset on 1 or multiple
outputs. This way you can easily configure multiple presets on one device, for example you
can add 2 turnouts and 3 signals within a few simple clicks. During the configuration you
can easily select the address per preset if needed.
Custom configuration
This option is still in development, more information will follow when available.
Saved configurations
Within saved configurations you will find the configurations done through preset per out-
put. In the saved configuration screen the dark blue row is the currently active configura-
tion.
3.1.5 Start configuration
