manualshive.com logo in svg

Digikeijs DK50018, Инструкция по эксплуатации

Поделиться
Скачать
Digikeijs DK50018 Скачать руководство пользователя страница 15

 

 

 

DK50018 

-

 Bluetooth accessory and switching decoder Bluetooth connection 

 

 

DK50018 

-

 Bluetooth accessory and switching decoder 

 

 

www.digikeijs.com

 

*R

-

Bus, B

-

Bus are registered trademarks of Modelleisenbhan GmbH. XpressNet and RS

-

Bus are registered trademarks of Lenz                                                            15

www.digikeijs.com

 

www.digikeijs.com

 

3.1.4 DK50018 main options

 

Now that the device is added to the app and the connection is opened let

’

s explain the options that are available. 

Please note the X on the top right corner is used to disconnect the device from Bluetooth and will bring you back to the 
main page of the app. 

 

 

Update firmware

 

Within the update firmware section you can view the current firmware version of your device and you can see the lat-
est firmware available. Through the firmware section you can easily downgrade or update the firmware to your needs.

 

 

 

Start configuration

 

Within the configuration section you can configure the device and view and load previously saved configurations. In 
addition you can set the start address and open the switchboard.

 

 

Open Switchboard

 

When you open the Switchboard option, you will see 16 addresses that can be switched. The address numbers depend 
on the start address you have configured. Red means OFF, when you push the red address number it will turn Green, 
this means ON. You can now use the switchboard to use or test your attached devices. Please note this switchboard 
only uses Bluetooth and will not switch any other dcc addresses. 

 

 

Reset to default

 

The reset to default option will reset your device. In practice this means preset 0 will be loaded and the start address of 
the device will be set to 1. This option will only reset the physical device! Any saved configurations will still be available 
within the app and can be loaded through the saved configurations options.

 

 

 

Lock /  Unlock

 

To prevent other people / devices connecting to your DK50018 you can lock the device for Bluetooth broadcasting. 
When locked the device cannot be found anymore by other devices. 

 

 

Online help

 

Within the online help section you will find information and links to get support or view online help information 
through our support platform.

 

Содержание DK50018





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды