DigiDesign Trillium Lane Labs, Руководство пользователя, Страница: 68 / 114

Trillium Lane Labs Plug-ins Guide 62
Using TL InTune
When TL InTune detects a signal, the meter
lights up and displays the relative pitch of the
incoming signal. With stringed instruments,
this will vary during the attack and decay of the
note.
In Automatic mode, TL InTune estimates the
note to which you are trying to tune. If the cor-
rect note is not lit in automatic mode, click on
the note to which you are trying to tune for
greater accuracy. This will lock TL InTune to the
specified note.
The meter will display the frequency of the note
detected, and the accuracy is displayed on a
scale of plus/minus 50 cents. In addition, the in-
formation display will display the note and the
number of cents from perfect tuning.
When loading factory presets, stringed instru-
ments are laid out from the highest numbered
string (usually the lowest tone) to the highest,
from left to right. For example, a six string guitar
in standard tuning is shown as E2, A2, D3, G3,
B3, E4, which are the notes and octaves for the
sixth string through to the first string respec-
tively.
For best tuning results with guitars, do the fol-
lowing:
• Use headphones, as loud monitors can
modulate the guitar string.
• Switch your guitar to its rhythm (neck)
pickup, if it has one.
• Roll your guitar’s tone knobs all the way off
to remove all the highs.
• Pluck the open string right over the twelfth
fret, not over the pickup.
To produce convenient test tones, select the ap-
propriate preset from the Librarian menu and
select an appropriate test tone from the Test
Tone menu. Click on the desired Note button to
produce the appropriate test tone. Test tones
can be routed to headphones as required for mu-
sicians during session.