DigiDesign Trillium Lane Labs, Руководство пользователя, Страница: 39 / 114

Chapter 5: TL Drum Rehab 33
Use the Velocity Map to select a Zone for load-
ing a sample and also to adjust the crossfade be-
tween Zones. Using multiple Velocity Zones lets
you layer samples by dynamics for more realistic
drum sample playback. Use the left-most Zone
for the quietest (
pianissimo ) samples, use the
right-most for the loudest ( fortissimo ). Up to
four samples (Clips) can be added to each Zone,
to give playback a more human and natural
quality. (For more information on using multi-
ple clips per Zone, see “Clips” on page 40).
To load a sample into a Zone:
1
Click the Zone in the Velocity Map where you
want to load a sample. The selected Zone is indi-
cated by a white triangle.
2
In the Library browser (located to right of the
Main window), navigate to the audio file you
want to load (a WAV, AIF, or SD2 file,
not a DRP
file).
3
Double-click the audio file (WAV, AIF, or SD2)
you want to load into the selected Zone.
In most simple TL Drum Rehab applications,
you may only need to load a single sample into
a single Zone. However, for nuanced and dy-
namic sounds, you can use up to 16 Zones for
dynamically layered samples.
To adjust the crossfade between Zones:
„
To change the location of the crossfade be-
tween Zones, click the border between Zones
and drag it left or right. This determines the
range in which the detected amplitude of the
original track triggers (plays back) the sample
loaded into the Zone.
„
To change the range of the crossfade between
Zones, click the border between Zones and drag
it up or down. This determines the range of the
crossfade between samples loaded into adjacent
Zones.
Minimum and Maximum Threshold
Controls
Adjust the Minimum and Maximum Threshold
controls to determine the minimum and maxi-
mum amplitudes for detecting triggers. The
Minimum Threshold control is to the left of the
Velocity Map and the Maximum Threshold con-
trol is to the right. The Minimum Threshold
control is useful for filtering out bleed through
hits (like the snare bleed through on a kick
track) so that you only get the triggers you want.
The Minimum and Maximum Threshold con-
trols also set the amplitude range within which
Velocity Zones trigger samples.
DRP files cannot be loaded into a Zone.
DRP files contain multiple sample with
fixed Zone and Clip assignments. Once you
load samples into Zones and Clips, you can
save them all together as a DRP file.
For a workflow example of loading samples
into Zones, see “Loading Samples and Sav-
ing Custom DRP Files” on page 44.
Adjusting the location of the crossfade between Velocity
Zones
Adjusting the range of the crossfade between Velocity
Zones