digicon Tx1500, Руководство по установке

Страница: 17 / 36

9
th
Step:
Fixing the coverage
a.
Check the height from the floor to the upper part of the roof (P1) – 2.1
meters with tolerance of 5mm;
b. Place the turnstile coverage (P27) over the roof (P1) and the stationery arm
(P24);
c. In each fixation, use 2 washers (P7), screw (P26), and nut (P18). Obs.: place
the screw from the bottom upwards. Do not fasten it.
d. Fix the roof (P1) with the turnstile coverage (P27), using screw (P3) and nut
(P4);
e.
Align the turnstile coverage (P27) with the central hole, considering 70cm
plus the hole radius of 11.5cm = total 81,5 cm of the inner central rod of the
structure to the hole's larger size and the inner stationery column in relation to
the hole's large side. Details in the figure below:
f. After aligning, fasten the screws in all the fixing points of the turnstile
coverage (P27).
Quantity of parts used in this stage:
Ÿ
P3 = 2x - M6 x 15 Allen screw
Ÿ
P4 = 2x - M6 Nut
Ÿ
P7 = 16x - D = 30,5 x 10,5 x 3mm Washer
Ÿ
P18 = 8x - M10 Nut
Ÿ
P26 = 8x - M10 x 30 Hexagonal head screw
Ÿ
P27 = 1x - Coverage
Ÿ
P30 = 2X - D= 6 Plat washer
Coverage face must be
aligned to stationery arm
Alignment detail
Alignment detail
Coverage face must be
parallel to the roof's side
P18
P7
P26
Torniquete
Tx1500
17
P27
P4
P3
P30