Description
3.11
*S0
Subaddress function disable
*S1
Subaddress function enable
To insert the Subaddress field into SNM 70, please make reference to the AT&Z6 command.
Store: S100 (bit2)
Default=*S0
*W
Port Selector
This command selects the serial port to be activated on answering an incoming call
*W0
If the B1 and B2 channels are available, the first incoming call is addressed to the serial port JC. If
the B1 is busy and only B2 is available, the incoming call is addressed to the serial port JA.
*W1
The incoming call is addressed to the serial port in accordance with the subaddress defined.
*W2
The incoming call is addressed to the serial port in accordance with the MSM defined.
3.2.
S-REGISTERS
S-registers are byte-wide locatiosn in SNM 70 memory containing information about its
configuration.
All values are in decimal format.
If the register type is non-storable, the register value has to be written after SNM 70 reset or
powered-on.
REG.
RANGE
UNIT
DEF.
DESCRIPTION
S0
0-255
Ring
0
Ring to answer on
S1
0-255
Ring
0
Ring count
S2
0-255
ASCII
43
Escape character
S3
0-127
ASCII
13
Carriage return character
S4
0-127
ASCII
10
Line Feed character
S5
0-127
ASCII
8
Back Space character
S7
1-255
1 sec.
60
Wait for data carrier
S8
0-255
1 sec.
2
Pause time for “,” character
S9
1-255
100ms
6
Answer tone detection time
S10
1-255
100ms
14
Lost carrier to hang up delay
S12
0-255
20ms
50
Escape sequence code guard
S18
0-255
1 sec.
0
Test timer
S30
0-255
1 min
0
Inactivity timer on data (cannot be stored)
S32
0-255
ASCII
17
Xon character
S33
0-255
ASCII
19
Xoff character
S91
-3-15
db
10
Adjust transmission level
S92
-3-15
db
10
Adjust transmission level in fax mode
S95
0-255
ASCII
2
Connection messages management
SNM7003.pm6
4/8/98, 14:46
11
