Digicom PALLADIO ISDN, Руководство пользователя

Страница: 49 / 65

PALLADIO ISDN AT Command Set
7.11
!D0 The Caller ID number is dispalyed without any modification for
Incoming call defined "International".
!D1 Only for National incoming Call, the Caller ID number is
dispalyed adding a 0 in front of the area code.
Default=!D1
!E Type of number used in the Calling Party Number field
!E0 Type of number defined "Unknown"
!E1 Type of number defined "National"
Default=!E0
!I V.110 Intermediate Rate
This command enable or disable the V.110 Intermediate Rate information in
Setup message. In case of Outgoing call to GSM we suggest to enable this
feature.
!I0 Intermediate Rate for enable
!I1 Intermediate Rate for disable
Default=!I1
!N1= Store Caller Identification number (CALLER ID)
This command enable to store the telephone number for the CALLER ID
function.
!N1=”nnnn” where “nnnn” is the telephone number
!N1?
show the stored telephone number
To enable the CALLER ID function, please also make reference to the AT*I
command.
Default= n/a
!N2= Store MultiSubscriber number (MSN)
This command enable to store the own telephone number for the
MultiSubscriber Number function.
!N2=”nnnn” where “nnnn” is the telephone number
!N2?
show the stored MultiSubscriber number
To enable the MultiSubscriber Number function, please also make reference
to the AT*M command.
Default= n/a