Digicom PALLADIO ISDN, Руководство пользователя

Страница: 40 / 65

7.2
PALLADIO ISDN AT Command Set
I Product Information
I0 Model.
I1 Checksum calculation, the result is displayed in Hexadecimal
digit.
I2 Compare the checksum calculation with the stored value, the
response will be OK or ERROR.
I3 Revision level.
I4 Display Central office
Default= n/a
N Select the speed adaptation (V.110 or V120)
N0 In Originate mode: ISDN modem makes the connection at
the speed fixed from register S37
In Answer mode: ISDN modem accepts incoming call in
accordance with the set-up of the command
AT%A2 and
the register S37.
N1 In Originate mode:ISDN modem makes the connection at the
speed detected at the last autobaud.
If this value is greater than 19200bit/s, the connection will be
established at 19.200bit/s.
For speed detection below 19.200bit/s, the connectionwill be
established at the line speed.
In Answer mode:ISDN modem handshake the standard and
the speed in accordance with the Bearer Capability information
sent from the remote user
Default= N1
O Go On-line from Escape
ISDN modem returns in On-line from the Escape status
O Go On-line.
Default= n/a
Q Returns code
Enable or disable the return codes from ISDN modem to the Computer.
Q0 Messages transmission enabled
Q1 Messages transmission disabled
Default= Q0