Digicom PALLADIO ISDN, Руководство пользователя

Страница: 28 / 65

In the Modem configuration window, set the Modem protocol for ISDN
connections (for Internet calls, select PPP (64K):
Protocol Connection type
AUTO (2Ch) For incoming calls (server mode)
PPP (128K) (1) 128Kbit/s Internet
PPP (128K,CHAP)
(1)
128Kbit/s Internet with CHAP authentication
PPP (128K,PAP) (1) 128Kbit/s Internet with PAP authentication
PPP (64K) 64Kbit/s Internet
V.110 (x) ISDN-GSM with V.110 protocol at x Kbit/s
ISDN-ISDN with V.110 protocol at x Kbit/s
V.120 (64K) ISDN-ISDN with V.120 protocol at 64Kbit/s
(1) Verify with your Internet Service Provider the authentication type.
For 128 Kbit/s Internet connections it is necessary to select the PPP protocol
(128K) and to insert the Provider’s telephone number twice with an asterisk.
(eg. 0123456789*0123456789).
The following table shows the connection speed depending on the installed
driver and on the telephone number inserted:
Config. Protocol Format telephone number Speed
1 PPP (64K) 0123456789 64000 bit/s
2 PPP (128K) 0123456789 64000 bit/s
3 PPP (128K) 0123456789*0123456789 128000 bit/s
PLEASE NOTE: not all Internet accounts do support 128Kbit/s connections. Check with
your Provider if this service is available.
After the connection, carry out a Download and check that the speed is greater of
80Kbit/s.
If your Internet account does not support 128Kbit/s connections, you have to use
the 1st or the 2nd configuration in the table.
Using the 3th configuration, you will pay twice for two 64Kbit/s connections.
Check further Internet configurations with your Provider.
4.4. HOW TO REMOVE PALLADIO ISDN (WINDOWS® 2000)
Run Control Pannel and Phone and Modem Options, select Modem folder,
select Digicom Palladio ISDN driver and click Remove.