Regulatory information
Europe (CE/UKCA) for model: XBRR
Digi XBee® RR RF Module Hardware Reference Manual
55
UK Conformity Assessed (UKCA) labeling requirements
See
guidance/using-the-ukca-marking
for further details.
You must make sure that:
n
if you reduce or enlarge the size of your marking, the letters forming the UKCA marking must
be in proportion to the version set out below
n
the UKCA marking is at least 5 mm in height – unless a different minimum dimension is
specified in the relevant legislation
n
the UKCA marking is easily visible, legible (from 1 January 2023 it must be permanently
attached)
n
the UKCA marking can take different forms (for example, the colour does not have to be solid),
as long as it remains visible, legible and maintains the required proportions.
Important note
Digi customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information.
Declarations of conformity
Digi has issued Declarations of Conformity for the XBee RF Modules concerning emissions, EMC, and
safety. For more information, see
www.digi.com/resources/certifications
Antennas
The following antennas have been tested for use with the XBee RR RF Module. All antenna part
numbers followed by an asterisk (*) are not available from Digi. Consult with an antenna
manufacturer for an equivalent option.
