Digi XBee RR Скачать руководство пользователя | Manualshive

Страница: 52 / 67

background image

Regulatory information

ISED (Innovation, Science and Economic Development Canada)

Digi XBee® RR RF Module Hardware Reference Manual

52

ISED (Innovation, Science and Economic Development Canada)

Labeling requirements

Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on
the outside of the final product enclosure must display the following text.

For model XBRR, XBee RR RF MMT

Contains Model XBRR, IC: 1846A-XBRR

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts FCC
test report or CISPR 22 test report for compliance with ICES-003.

L'intégrateur est responsable de la conformité de son produit aux normes IC ICES-003 et FCC Part 15,
Sub. B - Radiateurs Involontaires. ICES-003 est identique à FCC Part 15 Sub. B et Industrie Canada
accepte le rapport de test FCC ou le rapport de test CISPR 22 pour la conformité à la norme ICES-003.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

For PRO model XBPRR, XBee RR RF MMT

Contains Model XBPRR, IC: 1846A-XBPRR

The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts FCC
test report or CISPR 22 test report for compliance with ICES-003.

L'intégrateur est responsable de la conformité de son produit aux normes IC ICES-003 et FCC Part 15,
Sub. B - Radiateurs Involontaires. ICES-003 est identique à FCC Part 15 Sub. B et Industrie Canada
accepte le rapport de test FCC ou le rapport de test CISPR 22 pour la conformité à la norme ICES-003.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RF Exposure

CAUTION!

This equipment is approved for mobile and base station transmitting devices only.

Antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.

«
...
50
51
52
53
54
...
»

Содержание XBee RR




































































Отзывы:

Нет отзывов

Похожие инструкции для XBee RR

Бренд: VEF Страницы: 3

Бренд: Ubiquiti Страницы: 36

Бренд: RTS Страницы: 40

Бренд: QUAN SHENG Страницы: 16

Бренд: Num'axes Страницы: 28

Бренд: Vertex Standard Страницы: 41

Бренд: Vertex Standard Страницы: 94

Бренд: Brigmton Страницы: 14

Бренд: Infinition Страницы: 16

Бренд: Vertex Standard Страницы: 20

Sound Splash FM

Бренд: ION Страницы: 2

Бренд: Vertex Standard Страницы: 76

Бренд: Makita Страницы: 91

Бренд: Makita Страницы: 20

Бренд: Makita Страницы: 100

Бренд: Makita Страницы: 129

Бренд: Makita Страницы: 24

Бренд: Makita Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды