Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 301-1141-01 - WATCHPORT TEMP SENSOR
Contact us: [email protected] Website: www.integrated-circuit.com
Watchport Installation Guide (90000406 Rev. H) – Page 17
•
Configure - Reassign the physical port on your device to any available Windows COM port number
from 1 to 255 and give your device a user friendly Device Name. This capability is particularly
helpful if you have more than one device.
•
Port Flags - Configure performance options and special functionality on a per-port basis.
Low Latency:
Normally the UART will interrupt when the receiver has been idle for 4 character times.
(For example 4ms at 9600) As long as data is being received the UART will continue to
buffer them until its internal FIFO is full (~56 bytes). This flag causes the Edgeport to
poll the RX FIFO for received bytes. If any bytes are available they will be sent to the
driver without any delay.
20 / 28
20 / 28
