Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 301-1141-01 - WATCHPORT TEMP SENSOR
Contact us: [email protected] Website: www.integrated-circuit.com
Watchport Installation Guide (90000406 Rev. H) – Page 15
Watchport/W (Water Detector)
The Watchport/W uses an RS-232 modem signal interface and gives a binary output as frequently as 100
times per second. If using the Watchport Manager, the sensor is defaults to 1 read per 3 seconds.
DCD high indicates wet and DCD low indicates not wet.
The two prongs projecting from the bottom are for securing the detector to a soft surface such as pinewood
or wallboard. The surface should not be conductive when it is dry, so it cannot be a metallic or other
conductive material.
18 / 28
18 / 28
