Digi E230 Скачать руководство пользователя страница 12

Note:
For details about setting the profile, contact your service provider.

Creating a Dial-up Profile
1. Click 

New to set the profile name, access number, user name, password, Access  

  Point Name (APN) and APN status
2. Click 

Advanced to set the IP information, authentication protocol, Domain Name  

  Server (DNS) and Windows Internet Name Service (WINS)
3. Click 

OK to save the advanced settings and return to the Dial-Up interface

4. Click 

OK and the Prompt dialog box is displayed

5. Click 

Yes to save the settings; or click No to cancel the settings

Editing a Dial-up Profile
1. In the 

Profile Name drop-down combo box, select a setting

2. Click 

Edit to modify the profile name, access number, user name, password,  

  APN name and APN status
3. Click 

Advanced to set the IP information, authentication protocol, DNS, and WINS

4. Click 

OK to save the advanced settings and return to the Dial-Up interface

5. Click 

OK and the Prompt dialog box is displayed

6. Click

 Yes to save the settings; or click No to cancel the edits

Deleting a Dial-up Profile
1. In the 

Profile Name drop-down combo box, select a setting

2. Click

 Delete and the Prompt dialog box is displayed

3. Click 

Yes to delete the setting; or click No to cancel the deletion

9

Safety Information

Read  the  safety  information  carefully  to  ensure  the  correct  and  safe  use  of  your 
wireless device.

Interference

Do not use your wireless device if using the device is prohibited or when it causes 
danger or interference with electric devices.

Medical Device

•  Do not use your wireless device and follow the rules and regulations set forth  

 

by hospitals and healthcare facilities.

•  Some wireless devices may affect the performance of hearing aids. For  

 

any such problems, consult your service provider.

•  If you are using an electronic medical device, consult the doctor or device  

 

manufacturer to confirm whether radio waves affect the operation of  

 

this device.

Area with Inflammables and Explosives

To  prevent  explosions  and  fires  in  areas  that  are  stored  with  inflammable  and 
explosive  devices,  do  not  use  your  wireless  device  and  observe  the  rules.  Areas 
stored with inflammables and explosives include but are not limited to the following:
•  Petrol station
•  Fuel depot (such as the bunk below the deck of a ship)
•  Container/Vehicle for storing or transporting fuels or chemical products
•  Area where the air contains chemical substances and particles (such as granule,  
 

dust, or metal powder)

8

Содержание E230




















Отзывы: