background image

Uninstalling the Management Program

1.  Choose 

Start > Control Panel

2.  Find the management program, and click 

Add/Remove Program to uninstall

 

the management program

Note:
It  is  recommended  to  restart  the  PC  after  the  uninstallation  to  ensure  that  the 
management program is completely uninstalled.

Removing the E230

1.  Double-click      in the system tray. The 

Unplug or Eject Hardware interface

 

is displayed

2.  Select the hardware related to the E230 and click 

Stop

3.  When the prompt "It is safe to remove the device" is displayed, remove the E230
Note:
Before removing the E230, exit the management program.

7

k

    FAQ

What should I do if I cannot access the Internet?

1. Check the network signal strength
2. Check whether you have activated the wireless online service. You can ask  

  the local network operator how to activate it
3. If the wireless online service is activated, check network settings according  

  to the instructions in “Internet Services”

    Acronyms and Abbreviations

Numeric

3G 

The Third Generation

A   

 

APN 

Access Point Name

D  

 

DNS 

Domain Name Server

G  

 

GPRS 

General Packet Radio Service

P   

 

PIN 

Personal Identification Number

   

 

PUK 

PIN Unblocking Key

S   

 

SIM 

Subscriber Identity Module

U  

 

USIM 

UMTS Service Identity Module

W  

 

WINS 

Windows Internet Name Service

4

5

10

Содержание E230




















Отзывы: