Recall Mode:
Recall mode can be entered only when there is a minimum of 1 race record in the memory.
Press [
MODE
] until the display shows a race number on the first row, as in Fig. 21.
Fig. 21
The first row of the display shows the race type i.e. TRACK, SINGLE or MULTI followed
by a race number such as 0001, 0002 etc. The second row shows the date the race was
created. For example ‘ 16 01 03 ’ for 16
th
January 2003. Press [
⇐
]
or
[
⇒
] to select other
races. To view the race, press [
ENTER
]
when that race record is displayed. Use [
⇐
]
or
[
⇒
] again to display records in that race. To exit, press [
MODE
].
**: For fast advance hold down [
⇐
]
or
[
⇒
]
for 2 seconds
Memory:
The
‘ MEMORY LOW ’ indicator on the top left corner will be turned on when only 100
memories are left and started blinking when less than 50 memories left.
IMPORTANT: RACE WILL AUTOMATICALLY STOP IF NO MEMORY IS LEFT. When
this happens the display will show ‘ MEMORY FULL ’ and the ‘ MEMORY ’ indicator on
the top left corner will start blinking, as in Fig. 22.
Fig. 22.
No new race can be started unless some memories are released. See
Delete Race
paragraph below for releasing memories.
Battery low indication:
The battery low indicator will be turned on (Fig. 23) when the voltage of the back up
battery (CR2032) drops below 2.6V. Battery replacement is needed.
Battery low indicator
Fig. 23.
**: Only replace the CR2032 with the 4 pieces AA size alkaline
Batteries installed or
with the AC adaptor plugged. This can retain the timer’s memories and settings.
7
