"Digi II" Series Heater Installation & Operation Instructions
SECTION 6: OPERATION, CONTINUED
Next will display:
MENU 3
OFFSET: T1 0C
Using the arrow keys, select the calibration value (0 +/-10C).
Example: After reading the temperature on the thermometer in the sauna, you noticed that the temperature
reading in the display is 4C higher. Set Offset T1 to -4C to get the displayed temperature to match the
thermometer.
(This offset does not change the actual temperature, this is just for indication only.)
Press
PROG/OK
: to save the calibration value.
Next will display:
MENU 4
SMARTSAUNA: OFF
Using the arrow keys, select ON or OFF
Press
PROG/OK
: to save the setting.
Note: SmartSauna measures the temperature in the sauna, and based on this information, the control will
determine the length of time needed to heat the sauna to the set value.
This function is only available in
timer mode.
Next will display:
MENU 5
CLOCK: 24 h
Using the arrow keys, select a 12 or 24-hour clock. If a 12-hour clock is selected, AM or PM will appear in the
display after the time. Press
PROG/OK
: to save the setting.
Next will display:
MENU 6
TEMPERATURE: C
Using the arrow keys, select the desired temperature scale. (Celsius or Fahrenheit) Press
PROG/OK
: to save the
setting.
Programming Memory (User buttons)
Press
ON/OFF
and the greeting appears in the display and the backlight comes on. Next press
PROG/OK
and
the following will appear in the display: The first number indicates start time, the length of sauna, and the last
is desired temperature.
17:30
01:00
The maximum the timer will allow the heater to operate is 60 minutes.
50C
Note!
The start time reading in the display is not saved in the memory slots. Time delay is not a memory
option.
Press the
Sauna Length
button and the hours and minutes (hh:mm) will appear in the display.
Sauna Length
:
01:00
The duration can now be set using the arrow keys. When the desired time
has been selected, press
PROG/OK
to return to previous screen.
