Digi Digi Conntect ME, Справочник по аппаратуре

Страница: 20 / 64

P o r t D e s c r i p t i o n s
2 0
„ „ „ „ „ „ „
D i g i C o n n e c t W i - M E & D i g i C o n n e c t M E H a r d w a r e R e f e r e n c e
Placement of Module
Caution
If you handle the module, wear a grounding wrist strap to avoid ESD
damage.
Port Descriptions
The development board provides the following ports:
„ Primary Serial Port, P1
„
Secondary Serial Port, P2
„ GPIO Port, P3
See the figure titled "Board Layout" on page 18 for the location of the ports. The following
sections describe the ports.
Primary Serial Port, P1
The Primary Serial Port is a DB-9 male connector that is labeled as P1 on the development
board. The port is used with the integration kit and the development kit. See the following
figure for pin orientation; see the following table for pin assignments.
00000015
Module connector
Development
board
Module with
JTAG connector
Module JTAG
connector
DC_ME-HWR.book Page 20 Thursday, July 1, 2004 11:12 AM