CR4110 Installation Guide
4
Preface
This guide describes the installation procedure for the CR4110. It is intended to provide
sufficient information for you to be able to connect the unit to your terminal equipment and
power supply. A complete reference guide to the software features that are available on
the product is available separately in PDF format which can be downloaded from the Digi
International website (
www.digi.com
).
All models feature:
1 x 10/100Base-T Ethernet port
1 x RS232 sync/async serial port (25-way D)
2 x USB 2.0 host ports
2 x R-UIM card sockets
1 x proprietary expansion port (RJ11)
CDMA 1xEV-DO 450 Release A wireless capability
The CR4110 may be purchased with an optional GPS (Global Positioning System)
module.
Note:
You will not be able to use the router for remote communication until you have
subscribed to a suitable wireless network service.
Package Contents
When you receive the router carefully unpack it and check the contents. These should
include:
CR4110 router system unit (81-CR4110-SSEU-00)
100V-230VAC, 50 - 60/13A
– 12V DC 1.5A mains adapter
this Installation Guide
2M CAT5 STP (shielded twisted pair) LAN cable
2 x wireless stub antennas
If any item is missing or damaged, please contact your supplier. You should also make a
record of any damage that may have occurred during shipping and report it to the carrier.
Antennas for use with the GPS option may be purchased separately.
