ConnectCore 6UL SBC Pro specifications
Mechanical specification
ConnectCore 6UL SBC Pro Hardware Reference Manual
45
Power-off
System in power-off with RTC enabled.
IDLE
System up and running. Ethernet and wireless disabled.
Decoding video
System up and running with the following configuration:
n
Ethernet and wireless disabled.
n
Fusion7 parallel display connected to the system.
Includes two different use cases:
n
Display connected in IDLE mode (without decoding video).
n
CPU decoding video.
CPU stress
System up and running with the following configuration:
n
One Ethernet interface up and linked. The other one disabled.
n
USB connected to the system.
n
Hanoi application running (Hanoi application stresses the CPU and put it at 100% work load).
Mechanical specification
The ConnectCore 6UL SBC Pro is a 100mm x 72mm pico-ITX board. Four 3.2mm drills are located on
the four corners of the PCB for assembling the board into an enclosure. These drills have a 5.5mm
round metalized area for the screws and nuts. The board has four 2.6mm drills to assembly a half size
or a full size PCI express mini card module. These drills have a 5.8mm x 5.8mm square metalized area
for the screws and nuts. There must be a recess in the board to accommodate the components on the
bottom side of the SOM. All dimensions on the following pictures are in millimeters.