Digi Connect WS, Справочник по аппаратуре, Страница: 41 / 314

Electromagnetic Guidance and manufacturer’s declaration
Connect WS Hardware Reference Manual 41
Electromagnetic immunity
Connect WS is intended for use in electromagnetic environments within the limits specified below. The customer or
user of Connect WS should assure that it is used in such an environment.
Note Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey,
should be less than the compliance level in each frequency range. Interference may occur in the
vicinity of equipment marked with this symbol:
Immunity test IEC 60601 test level Compliance level
Electromagnetic environment
guidance
Conducted RF IEC 61000-4-6 3 Vrms 150 kHz to 80 MHz 3 V See next section for
recommended separation
distance
Over the frequency range 150 kHz
to 80 MHz, field strengths should
be less than 3 V/m.
Radiated RF IEC 61000-4-3 3 V/m 80 MHz to 2.5 GHz 3 V/m See next section for
recommended separation
distance