-
Breakdown in the cargo cells due to overload (excess weight or impact incurred to
the weighing platform).
-
If the error continues, seek technical assistance.
4.2
Error Five
-
Look for a bad connection in the cables or a severed cable.
-
Cargo cell burned by electrical surge. (solder, lightning, short circuit, etc).
-
In the case that there is no problem with the cargo cell, seek technical assistance.
-
Breakdown in the cargo cell due to overload (excess weight or impact incurred to the
weighing platform).
-
In the case that the error persists, get in contact with technical assistance.
-
Note: In the case that error 5 is indicated, be it from impact to or overload of the
weighing platform, it is because there is a discrepancy in the cargo cell. The cargo
cell will have to substitute and a new calibration will have to be done.
4.3 Error Six
- Verify that the values were entered in Counter Mode.
- Verify that the values were entered within the configuration parameters.
4.4 Error 7
4.5 Error Eight
-
Recharge the battery.
-
Note: If this error appears recharge the battery immediately. Avoid running the
scale by battery.
4.6
Low Battery
Description of error: Overload on the scale
beyond the cargo cell’s capacity. This error only
appears during scale operation.
Description of error: Incorrect data input.
Description of error: Insufficient operation
tension to give a reliable weight reading.
Description of error: The clock battery is low.
This problem only occurs when you check the
clock for the first time after turning it on.
