Digi-Pas
®
© 2018 Digipas Technologies Inc. All Rights Reserved.
www.digipas.com
Page 12
DWL-5x000XY DATA SHEET
4.3.
Operation of Sensor Module(s) with Control Box
1.
Assuming steps stated in 3.2 Configuration of Sensor Module(s) with Control Box and 4.1
Installation of the DWL5x00XY PC Sync Software have been done in this stage. Open PC
SYNC software and select the desired mode from the drop down menu as shown in Figure
22. In this example, RS485 is selected.
Figure 22. Select mode from the drop down menu
Figure 23. Select RS485 from the drop down menu
2.
Next, click “Yes” button as in Figure 23.
3. Select the COM port.
Figure 24. COM port selection
4. Screen as illustrated in Figure 25 appears. The feature icons are enabled and ready for se-
lection (e.g. Single Angle Meter, Dual Angle Meter...). Following is an example when Single
Angle Meter feature icon is clicked.
Figure 25. Interface of the PC SYNC software with Single Angle Meter feature
