9
4 SAFETY PRECAUTIONS - GENERAL INFORMATION
OPERATING THE TELESCOPIC PILING AND DRILLING EXTENSION CONT....
• Drill stem rotation must be stopped before adding or removing sections, or making adjustments to the drill stem or
sampling equipment.
• Augers shall be cleaned only when the rotating mechanism is in neutral and the auger stopped; long-handled shovels
shall be used to move cuttings from the auger. Materials heavier than 22lbs (10kgs) must be moved mechanically or
by using at least two people.
• Drilling operations must be stopped in the event of local thunderstorm, or lightning activity. During operation, weather
conditions shall be monitored: operations shall cease during electrical storms or when electrical storms are imminent.
• Open bore holes must be capped and flagged.
STORAGE OF TELESCOPIC PILING AND DRILLING EXTENSION
• Seal hydraulic couplers from contaminants and secure all hydraulic hoses off the ground to help prevent damage.
• Clean the unit thoroughly, removing all mud, dirt, and grease.
• Inspect for visible signs of wear, breakage, or damage. Order any parts required and make the necessary repairs to
avoid delays upon removal from storage.
• Coat liberally with grease the output shaft and collar, extension shaft and collar, and all connecting pins to prevent
rust and reduce wear.
• Tighten loose nuts, capscrews and hydraulic connections.
• Replace decals that are damaged or in unreadable condition.
• Store unit in a dry and protected place. Leaving the unit outside will materially shorten its life.
WARNING
WARNING
