20
PM-000134 - Telescopic Piling and Drilling Extension Operators Manual - September 2015
8 SAFETY - DECAL LOCATION
PLACEMENT OR REPLACEMENT OF SAFETY SIGNS
1. Clean the area of application with non-flammable
solvent, then wash the same area with soap
and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing
the adhesive surface.
4. Apply the safety sign to the position shown in the
diagram and smooth out any bubbles.
INSTRUCTIONS
• Keep all safety signs clean and legible.
• Replace all missing, illegible, or damaged
safety signs.
• Replacement parts for parts with safety signs
attached must also have safety signs attached.
• Safety signs are available from your dealer or from
Digga Australia.
ITEM 1
ITEM 2
OR
OR
OR
ITEM 3
ITEM 4
ITEM 5
ITEM 6
TELESCOPIC PILING EXTENSION
NO
ORDER CODE
DESCRIPTION
QTY
1
DE-000372
TPE-Outer Boom Decal
2
2
DE-000802
OR
DE-000805
Maximum Drive Torque
2
3
DE-000803
OR
DE-000806
Rated Operating Capacity
2
4
DE-000804
OR
DE-000807
Total Auger Weight
2
5
DE-000049
Digga Decal
2
6
DE-000467
Tie Down Decal
2
1
4
3
2
5
6
6
5
