Digga TPE-000039 Скачать руководство пользователя страница 22

22

PM-000134  - Telescopic Piling and Drilling Extension Operators Manual - September 2015

All new Digga products are warranted to be free from defects in materials or workmanship, for a period of twelve (12) 
months from date of orginal purchase, which may cause failure under normal usage and service when used for the 
purpose intended.
In the event of failure (excluding cable, ground engaging parts such as sprockets, digging chain, bearings, teeth, 
tamping and demolition heads, blade cutting edges, pilot bits, auger teeth, auger heads ), if after 
examination, Digga determines failure was due to defective material and/or workmanship, parts only will be repaired 
or replaced. Digga may request defective product or products be returned prepaid to them for inspection at their 
place of business or to a location specified by Digga. The warranty will be considered void if the product or any part 
of the product is modified or repaired in any way not expressly authorised by Digga, or if closed components are dis-
assembled prior to return. Closed components include, but are not limited to: gearboxes, hydraulic pumps, motors, 
cylinders and actuators. Any goods returned to Digga by the customer under warranty or repair must have all freight 
charges prepaid for on the customers account.
Any claims under this warranty must be made within fifteen (15) days after the Buyer learns of the facts upon which 
such claim is based. All claims not made in writing and received by Digga outside the time period specified above 
shall be deemed waived.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND THERE ARE NO WARRANTIES 
OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL DIGGA BE LIABLE 
FOR CONSEQUENTIAL OR SPECIAL DAMAGE. DIGGA’S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES 
TO BUYER, RESULTING FROM ANY CAUSE WHATSOEVER, INCLUDING DIGGA’S NEGLIGENCE, IRRESPECTIVE OF 
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE 
OF THE PARTICULAR PRODUCTS WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE CLAIMED, OR, AT THE 
ELECTION OF DIGGA, THE REPAIR OR REPLACEMENT OF DEFECTIVE OR DAMAGED PRODUCTS.

WARRANTY

DAMAGE OR FAILURE THROUGH OPERATOR ABUSE OR NEGLIGENCE VOIDS WARRANTY

Содержание TPE-000039
























Отзывы: