19
9 SAFETY - STICKER LOCATION
ITEM 1
ITEM 7
ITEM 2
ITEM 8
ITEM 9
ITEM 3
ITEM 4
ITEM 5
ITEM 6
6
6
5
1
9
9
2
3
7
8
4
PLACEMENT OR REPLACEMENT OF SAFETY
SIGNS
1. Clean the area of application with non-flammable
solvent, then wash the same area with soap
& water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign,
exposing the backing surface.
4. Apply the safety sign to the position shown in
the diagram above and smooth out any bubbles.
FOR SKID STEER MOUNT ONLY
INSTRUCTIONS
• Keep all safety signs clean and legible.
• Replace all missing, illegible, or damaged safety
signs.
• Replacement parts for parts with safety signs
attached must also have safety signs attached.
• Safety signs are available from your dealer or from
Digga Australia.
ITEM NO
ORDER
CODE
DESCRIPTION
QTY
1
DE-000168
Serial Tag
1
2
DE-000039
Caution: Op Manaul
2
3
DE-000083
Caution: Slasher Riding
2
4
DE-000079
Caution: 15m Distance
2
5
DE-000130
Warning: Slasha Tilts
1
6
DE-000066
Slasha By Digga
2
7
DE-000258
Danger Rotating Blade
2
8
DE-000257
Hearing & Eye Protection
2
9
DE-000049
Digga Logo
2
CAUTION
• PLEASE READ OPERATORS MANUAL
BEFORE OPERATION
• ENTANGLEMENT WITH ROTATING PARTS
CAN CAUSE INJURY OR DEATH
• ENSURE ALL ONLOOKERS KEEP 6M/20ft
CLEAR OF ALL MOVING PARTS
DE-000039
WARNING
WHEN OPERATING SLASHER
DO NOT
TILT SLASHER OVER 30
1.
RAISE SLASHER ABOVE
2.
300mm OFF FLOOR LEVEL
SIT ON SLASHER
3.
PLACE SLASHER IN A
4.
VERTICAL POSITION
O
DE-000130
