2
Control Buttons
Select programming mode
Turn program(s) ON/OFF
Start/stop a manual cycle
Move left/right to select a value
Raise/lower the selected value
5. INSTALLING THE BATTERIES
1. Open the battery compartment cap by
turning it counter-clockwise.
2. Install two, fresh, brand name, AA
alkaline batteries (not included)
and note the proper direction of the
positive and negative orientation on the
underside of the timer.
3. Insert and screw the battery cap
clockwise. Make sure to securely
tighten the cover firmly by hand only.
The timer display appears with a day,
PM, and the hour digit flashing. The timer
is ready to be installed and programmed.
3
Battery replacement
4. LCD DISPLAY AND CONTROLS
LCD Display
1.
Time and Date Icon –
Indicates current time and day is displayed
2.
Sensor Icon –
Appears when a rain sensor is active or when yellow wire loop
has been cut and watering is halted
3.
Watering Icon –
Appears when valve is open
4.
Set Watering Days Icon –
Choose either specific days, odd/even days, every X
hours, or up to once every 30 days
5.
Start Time Icon –
Up to 4 start times per day available
6.
Run
Time Icon –
Watering duration from 1 minute to 5 hours and 59 minutes
7.
Rain Delay Icon –
Delay irrigation setting from 1 to 99 days with automatic restart
8.
Manual
Run Icon –
Appears when manual button is pushed
9.
Battery Level Indicator –
Flashes when batteries are low and need to be replaced
10.
Day of the Week Underscore
–
Shows which day of the week the timer
will operate
11.
Represents Month
12.
Represents Year
q
r
y
u
i
o
t
w
e
s
d
a
2
