This screen appears if any program or valve is active. Press
to continue.
This screen appears if any program or group of valves is active.
Press
to continue.
This screen appears if a Manual Run is in progress. Press
to
continue.
This screen appears if Rain Stop is active. Press
to continue.
This screen appears if irrigation has stopped for a full month.
Press
to continue.
If the test is enabled in Setup System, this screen appears if the
valve wiring is open. Press
to continue.
If the test is enabled in Setup System, this screen appears if there
is a short in the wiring. Press
to continue.
This screen appears with the current date and time of the day.
Press
to continue.
This screen appears when the controller is running in local mode.
Press
to continue.
NOTE:
This screen is available only on model XRC with radio remote capability.
This screen appears when the sensor allows watering. Press
to continue.
This screen appears if no sensor is used. Press
to continue.
16
SAT 01/01/00
12:04 am
RUNNING IN
LOCAL MODE
Prog:X Active
Valve xx Open
Prog:X Active
GRPxx:yy Open
Manrun Active
Valve:XX Open
Rainstop Active
xx More Days
Irrigation Stop
for Month XXX
Station xx O/C
Wiring Fault
Station xx S/C
Wiring Fault
Sensor allows
Watering
Sensor is
Unused.
