Diffraction SBIG STC-428-OEM, Руководство пользователя

Страница: 7 / 44

SBIG STC-428-OEM CAMERA
USER’S MANUAL
7
1 - Installation
1.1 Supplied Components
Camera
The SBIG STC-428 camera is provided in one of two packages, as
described below. Observe proper handling procedures for sensitive
electronic equipment and unpack the contents carefully in a clean, dry,
static-free area. Inspect the contents to ensure all components are
present and in good order.
Evaluation Kit:
Your STC-428-EVAL Camera Evaluation Kit is provided in a foam-lined
hard shell protective case. The kit includes the parts and accessories
needed for convenient evaluation of the camera performance.
•
STC-428 monochrome imaging camera body, with desiccant plug
installed
•
T-Thread lens mount (M42 x 0.75)
•
4-40 front panel screw mounts
•
1/4-20 tripod mount
•
Camera dust cap
•
Power supply:
o Uni12V DC supply (60014A)
o
Power cable with USA, European, or Australian plug (specified
on ordering), or
•
+12 VDC Battery power cable (CA-ALUMABATTERY). Note that
this cable is an option in lieu of the AC power supply
•
USB flash drive
• Ferrite snap-on chokes to reduce radio frequency interference
(qty 2)
•
USB 3.0 cable, 15 feet (4.6 meters)
Production Model:
The Production model includes the STC-428-OEM standard
monochrome imaging camera body, with installed desiccant plug.
If you require any customization or kit parts, your volume production
model is given a designation, in the form STC-428-xxx.
Customization can include modified mounting points or housing,
customized firmware, internal mechanical shutter, integrated filter
wheel, and so forth.