Diffraction SBIG STC-428-OEM, Руководство пользователя

Страница: 28 / 44

SBIG STC-428-OEM CAMERA
USER’S MANUAL
28
Under Automatically Generate Groups click the Folder button to browse to a
folder containing your calibration images.
1. Use the Set Calibration command to set up calibration groups that will be
used to calibrate your individual raw light frames. Proceed as follows:
a)
Click Process > Set Calibration . The Set Calibration form opens.
b) Click the Folder button in the Automatically Generate Groups section to
browse to the folder containing your calibration images.
c) Select Auto-Generate (Clear Old) using the Auto-Generate dropdown
button. A set of Calibration Groups will appear in the list, with images
pre-sorted by calibration type, exposure, sensor temperature, etc.
d) To adjust the settings for an individual group, click on the group to
highlight it. You can then set the parameters such as Combine Type in
the Group Properties section as desired. You can also change the Name
of a group by double-clicking it in the list.
e) If you want to create a master calibration file for this group of files, click
the
Replace w/ Masters button. MaxIm LT will combine the files and
display the master file name in the Group Membership field. The master
file will automatically be saved in the same folder that contains the
individual calibration files. If you choose not to create such master
calibration files, MaxIm LT will stack the calibration automatically when
you calibrate your light frames.
f) Click OK when you are done.
2. Use the Stack command to calibrate and combine your raw light frames.
Proceed as follows:
a)
Click Process > Stack . The Stack form opens.
b) If you are using a filter wheel controlled by MaxIm LT then on the Select
tab, turn on Classify by FILTER . Click the FILTER button to set up the
filter mapping. This will determine which filters are mapped into the
LRGB color channels. To change a row, click once on the row, then click
once on the
Filter Color(s ) item, and enter a new value. This will ensure
that your filters are automatically assigned to the correct group.
c) Enable the Mark added images as Auto Calibrate checkbox. Each image
will automatically be calibrated as it is needed, using the settings from
the Set Calibration command.
d) Click the Add Files button to select the desired files. You can also use
the drop list adjacent to the Add Files button to select entire folders of
files to add. Browse to the folder where your images are located. When
you add individual files or folders, they will appear in the
Groups tree at
left. You can also deselect individual files from the tree so that they will
not be included in the stacking process.