Diffraction SBIG STC-428-OEM, Руководство пользователя

Страница: 15 / 44

SBIG STC-428-OEM CAMERA
USER’S MANUAL
15
Select your camera from the Devices list. The small asterisk (*) indicates
the currently selected camera. If there is more than one camera in your
system, select the one you want and click
OK .
Various camera parameters will auto-populate the display fields in the
form. The default settings should be fine for your initial connection -
reconfigure them if required.
Full details on these parameters are available
in the MaxIm DL Help file and at:
https://diffractionlimited.com/help/maximdl/SBIG_Gen_3.htm
Click OK to confirm your camera selection and close the DL Config form.
6. Click OK to accept the settings and close the Setup DL Imaging form.
7. Click the Options button under Camera 1. The Options form opens.
8. Configure any of the optional camera parameters if required or use the
default values as a starting point.
NOTE:
Access camera from separate thread and Access filter wheel from separate
thread must both be selected for both Camera 1 and Camera 2 (if used).
9. Click OK to accept the settings. The Options form closes and you are
returned to the Camera Control form.
10. Leave Camera 2 set to No Camera .