26
DIETZ GmbH / operating instructions manual XXL wheelchair tauron|rsi / Version 1.0.0 EN
5.1 Disc brake
In order to achieve an even braking effect, the
braking force is adjusted on the respective ad-
justing screw (left brake cylinder / right brake
cylinder). The braking force is increased by un-
screwing the adjusting screw. Loosen the lock
nut and unscrew the adjusting screw until you
hear grinding noises from the turning wheel.
Then screw in the adjusting screw until the
grinding noises stop. Once you have finished
adjusting the settings, the adjusting screw is
fixed by tightening the lock nut. The adjusting
screw on the brake cable facing the brake le-
ver has an even effect on both sides. It is only
used to finely adjust the braking force.
CAUTION
Ensure that both sides of the
wheelchair are adjusted evenly.
CAUTION
Only certified technical specialists
may carry out the setting options
illustrated and described in the
following chapter. Accidents may
result from incorrect modification
of the wheelchair.
Incorrectly adjusting the brakes
may have life-threatening
consequences.
05 ADJUSTMENTS FOR INDIVIDUAL SETTINGS
05 ADJUSTMENTS FOR INDIVIDUAL SETTINGS