15
Press the front clamp slightly upwards so that
the pin of the side panel is flat. Finally, secure
the two Allen screws in the front clamp.
If you continue to position the clamps to the
inside, the width of the back seat will be re-
duced. (4)
Conversely, the back seat becomes wider if
you position the clamps to the outside. (5)
(4)
(5)
3.7 Side abduction panels
The side abduction pads can be positioned
and inverted in addition to adjusting the back
area.
The standard position allows for abduction of
the leg position. (1)
The inverted position gives the thighs additio-
nal space. (2)
(1)
(2)
03 PUTTING INTO OPERATION
