Operating Manual Program Timers Variotime Single and Variotime Twin
Diehl AKO Stiftung & Co.KG, Appliance Europe, Pfannerstraße 75-83, DE – 88239 Wangen
Tel. +49 (7522) 73-0 • Fax +49 (7522) 73-250 •
• www.diehl.com/controls/appliance
Subject to change without notice – issued 04-2015 – page 11/20
3
Operating Variotime
As the operation of the timer versions
•
Variotime Single standard version with 24 hour and/or 7 day program
•
Variotime Single special version with 24 hour program only
•
Variotime Twin standard version with 24 hour and 7 day program
is widely identical, notwithstanding the housing type or the time format, these versions will
explicitly be mentioned only if necessary.
The timer is fully operable only after connection to the mains supply, completion of the
connections mentioned in section 2.3 and setting of the time of day and the day of the week.
3.1
Initial power up
When connecting Variotime to the mains, all display segments appear for approx. 2 seconds.
Subsequently, the display flashes “0:00” and the day indicator at day 1 (= Monday). This
indication remains as long as the program timer stays connected to the mains, waiting for the
input of time of day and day of the week.
3.1.1 Setting the day of the week and
the time of day
Proceed as follows:
1.
Variotime Single: set the right-hand slide switch to position.
Variotime Twin: set the right-hand slide switch to position RUN and press the buttons h and
m simultaneously for approximately 2 to 3 seconds.
The display stops flashing.
2.
Press the day button and set the day of the week as follows:
1 = Monday
3 = Wednesday
5 = Friday
7 = Sunday
2 = Tuesday
4 = Thursday
6 = Saturday
With every pressing action the day indicator advances one day. If the day button is
pressed continuously, the day indicator keeps advancing until button is released again.
24 hour version: not applicable.
3.
Set the present time of day via the buttons h and m (24 hour version: buttons plus or
minus).
