•
6
•
8. GROUNDING AND AC POWER CORD CONNECTIONS
8.1
This battery charger is for use on a
nominal 120 volt circuit and has a
grounded plug. The charger must
be grounded, to reduce the risk
of electric shock. The plug must
be plugged into an outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances. The plug pins must fit
the receptacle (outlet). Do not use
with an ungrounded system.
8.2 DANGER:
Never alter the AC
cord or plug provided – if it does
not fit the outlet, have a proper
grounded outlet installed by a
qualified electrician. An improper
connection can result in a risk of
an electric shock or electrocution.
NOTE:
Pursuant to Canadian
Regulations, use of an adapter
plug is not allowed in Canada. Use
of an adapter plug in the United
States is not recommended and
should not be used.
8.3 USING AN EXTENSION CORD
The use of an extension cord is
not recommended. If you must use
an extension cord, follow these
guidelines:
• Pins on plug of extension cord
must be the same number, size,
and shape as those of plug on
charger.
• Ensure that the extension cord
is properly wired and in good
electrical condition.
• Wire size must be large enough
for the AC ampere rating of
charger, as specified:
Length of cord (feet)
25
50
100 150
AWG* size of cord
14
12
10
8
*AWG-American Wire Gauge
9. ASSEMBLY INSTRUCTIONS
9.1
Remove all cord wraps and uncoil
the cables prior to using the
battery charger.
9.2
Extend the handle from the
retracted position by pulling it
upward until it locks into place.
(Press the small silver buttons
inward, if necessary.)
10. CONTROL PANEL
