DieHard 28.71219, Руководство оператора

Страница: 8 / 20

5
Be sure the area around the battery is well ventilated while the 3.2
battery is being charged.
Clean the battery terminals before charging the battery. During
3.3
cleaning, keep airborne corrosion from coming into contact
with your eyes, nose and mouth. Use baking soda and water to
neutralize the battery acid and help eliminate airborne corrosion.
Do not touch your eyes, nose or mouth.
Add distilled water to each cell until the battery acid reaches the
3.4
level specified by the battery manufacturer. Do not overfill. For
a battery without removable cell caps, such as valve regulated
lead acid batteries (VRLA), carefully follow the manufacturer’s
recharging instructions.
Read, understand and follow all instructions for the charger,
3.5
battery, vehicle and any equipment used near the battery
and charger. Study all of the battery manufacturer’s specific
precautions while charging and recommended rates
of charge.
Determine the voltage of the battery by referring to the vehicle
3.6
owner’s manual and make sure that the output voltage selector
switch is set to the correct voltage. If the charger has an
adjustable charge rate, charge the battery in the lowest rate first.
Make sure that the charger cable clips make tight connections. 3.7
ChARgER LOCATION 4.
RISK Of EXPLOSION
AND CONTACT WITh
BATTERY ACID.
Locate the charger as far away from the battery as the DC
4.1
cables permit.
Never place the charger directly above the battery being
4.2
charged; gases from the battery will corrode and damage
the charger.
Do not set the battery on top of the charger.
4.3
Never allow battery acid to drip onto the charger when reading 4.4
the electrolyte specific gravity or filling the battery.