DIEBOLD NIXDORF CINEO C4060, Инструкция по установке и эксплуатации

Страница: 27 / 72

Planning the installation
01750308102 A CINEO C4060 (RM4H) - Supplementary Instruction 27
3.4 Transport route requirements
The device is equipped with a shipping crate and can be transported with
a pallet truck. The forks of the truck must be pushed as far as possible
underneath the device from the front or the rear.
The entire transport route, like the installation site, must be checked for
load-carrying capacity and, if necessary, strengthened before the
installation date. In order to avoid damage at the floor covering, panels
(e.g. beaverboard) should be laid on the floor for the transport with a
pallet lift truck.
Observe the ambient condition requirements for transport and interim
storage (see chapter
„Appendix“ , section „Technical Data“ ).
Some dimensions may differ due to the shipping crate used (see
illustrations below).