DIEBOLD NIXDORF BEETLE /iSCAN EASY, Руководство пользователя

Страница: 93 / 120

BEETLE /iSCAN EASY User Manual
87
Clean print head and rubber roller with a soft lint-free cloth moistened with pure Isopropyl
alcohol (e.g. ISOPADS which can be ordered from Diebold Nixdorf).
Visually inspect the print head. If you can still see dirt, the cleaning procedure must be
repeated. You can identify the relevant and important thermal element zone by the thin line
crossed by wires.
Pay attention not to damage the paper end sensor when cleaning the print head.
Do not touch the rubber roll with your fingers.
While cleaning turn the rubber roller by hand with the lateral gear wheel make sure that the
entire roller will be cleaned.
Cleaning the print head not properly may cause an early failure.
Wait until the isopropyl alcohol has evaporated.
Insert the (new) paper-roll and close the cover. Print out a test ticket (see application
handbook) and verify the printing quality (density, alignment and consistency).