dicodes 2380, Руководство пользователя

Страница: 9 / 13

Increase wire
temperature
coefficient (*1)
Decrease wire
temperature
coefficient (*1)
Set Power Limit
(40Wmax single
80Wmax dual Bat.)
Select heater
protection mode
(1-10)
Select power
boost mode (1-
10)
Set the minimum bat
discharge level
(2.5-3V single 6.2-6.8V
dual battery)
Set display luminosity
(1 low to 4 high
brightness)
Select auto power
off time (1-2-5-10-15-
20-30-60 minutes)
Select number of clicks
to switch on mod (0-5).
0=> immediate vape
Select number of clicks
to get into the menu
(1-5).
Speed for button
usage (1 fast-5 slow).
(*2 )
Select wattage steps
1W/0.5W (<20W) and
2W/1W (20-40W)
5W/2.5W (>40W)
Selects temperature
unit either °Celsius or
°Fahrenheit.
Counts the number of
puffs since last counter
reset.
Displays pure vaping
time in H:MM:SS since
last counter reset
Energy taken from
battery during vaping
since last counter reset
Displays battery
capacitance since last
counter reset (can
show battery quality)
Reset the counters
above.
Total lifetime puffs
of mod.
Not resettable.
Total lifetime vaping
time of mod in
HHHH:MM
Not resettable.
Enables automatic
temperature
calibration when set to
1. (*3)
Select number of
batteries: 0 automatic,
1 single, 2 dual battery
Select display
orientation between
Left and Right (handed)
Select Expert mode to
enable power boost,
heater protection and
bypass mode.
Switch back all settings
to factory defaults
(refer to manual).
(*1 ) The temperature coefficient is determined by the type of wire material, and must be within the range 100 to 650:
320=dicodes-wire, 620=Nickel, about 105=Stainless Steel, 350=Titanium (varying literature values, danger: fire hazard),
480=Tungsten (Wolfram). Value to select = Literature-value*10E5 K. Example: Ni 6.2E-3*1/K * 10E5*K => 620
(*2 ) Setting 1 (fastest) as 2 but without animation (visual shift effect), setting 5 (slowest) as 4, but without fast auto-repeat.
(*3 ) Auto calibration is performed, when MOD is switched on, or when atomizer was removed and new atomizer is applied (when MOD
is already on).
F 06 Extended Functions Menu (Page 1: Overview)