Dickey-John GAC500XT Скачать руководство пользователя страница 39

Страница: 39 / 39

Dealers have the responsibility of calling to the attention of their customers the following

warranty prior to acceptance of an order from their customer for any DICKEY-john product.

DICKEY-john

WARRANTY

DICKEY-john warrants to the original purchaser for use that, if any part of the product

proves to be defective in material or workmanship within one year from date of original

installation, and is returned to DICKEY-john within 30 days after such defect is discovered,

DICKEY-john will (at our option) either replace or repair said part. This warranty does not

apply to damage resulting from misuse, neglect, accident, or improper installation or

maintenance. Said part will not be considered defective if it substantially fulfills the

performance expectations. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN

LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR

PURPOSE, AND OF ANY OTHER TYPE, WHETHER EXPRESS OR IMPLIED.

DICKEY-john neither assumes nor authorizes anyone to assume for it any other obligation or

liability in connection with said part and will not be liable for consequential damages.

Purchaser accepts these terms and warranty limitations unless the product is returned within

fifteen days for full refund of purchase price.

Содержание GAC500XT








































Результаты поиска

Содержание GAC500XT

Отзывы:

Похожие инструкции для GAC500XT

Бренды по названию

Популярные бренды

Dickey-John GAC500XT, Руководство оператора

Результаты поиска

Содержание GAC500XT

Отзывы:

Похожие инструкции для GAC500XT

Бренды по названию

Популярные бренды