Dickey-John GAC500XT, Руководство оператора

Страница: 23 / 39

OPERATOR’S MANUAL
TEST WEIGHT BIAS
ENTER
The test weight adjustment allows the entering of a correction factor for
differences between the GAC500XT grain test weight and the official test
weight method. An offset value may be introduced by authorized personnel.
To change the test weight bias, select the TEST WEIGHT BIAS option from
the Grain Information screen. Press the Enter button. Use the Arrow
buttons to enter the ACCESS CODE (the ACCESS CODE is set to “0000”
as a default) (Figure
23). Use the Arrow buttons to navigate to the
appropriate character and press the Enter button to select it. The Up and
Down Arrow buttons will increase/decrease the value of the number. The
Left and Right Arrow buttons will navigate through the number. Repeat
this process until all desired characters have been updated.
Figure 23
Entering Access Code
Enter button
Up and Down Arrow Buttons
Left and Right Arrow Buttons
Co r n
Test Weight B ias
0 .0
Enter Access Co de
0000
ESC
Escape button
Once the ACCESS CODE has been entered, press the Enter button again.
The Test Weight Bias screen will be displayed (Figure
24). Use the Arrow
buttons to enter the appropriate test weight bias. The Up and Down Arrow
buttons will increase/decrease the value of the number. The Left and Right
Arrow buttons will navigate through the number. Once the value has been
entered, press the Enter button to accept the value and return to the
previous screen. Press the Escape button to return to the previous screen.
Figure 24
Test Weight Bias Screen
Co r n
Test Weight B ias
0.0
GAC500XT
11001-1352-200510
GRAIN CALIBRATIONS 21