Dickey-John DjASM II, Руководство оператора, Страница: 19 / 28

OPERATOR’S MANUAL
Dj ASM II Air Seeder Monitor
11001-1311-200501
16 / SYSTEM OPERATION
Figure 20
Example of Low Hopper Level
ERRORS
The monitor can detect 8 Vdc error during start-up. If this error occurs, the
Module Display will output an “E”, followed by the module number. In the
following example, Module 5 detected an 8 V sensor supply voltage short to
ground.
Figure 21
Example of Module 5 Start-Up Error
This error CANNOT be disabled using the Alarm Cancel feature.
The problem must be either repaired or the module must be
disconnected from service.
The other error that the monitor will display is a communication error. If this
error occurs, the monitor will display a “C”, followed by the module number.
In the following example, the monitor detected a communication error with
Module 5.
Chirp
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Alarm