Dickey-John DjASM II, Руководство оператора, Страница: 17 / 28

OPERATOR’S MANUAL
Dj ASM II Air Seeder Monitor
11001-1311-200501
14 / SYSTEM OPERATION
Figure 16
Example of Single Row Failure
Unless the alarm is cancelled by toggling the I/O (power) switch, the display
will continue to show this condition. If this occurs, the display will scroll
through each module as before, but will illuminate only the failed rows. If an
additional single row failure occurs, the operation will return to dwell upon
that failure. If a second alarm cancel is performed, the display will again
scroll through each module as before, but will illuminate both failed rows.
MULTIPLE ROW FAILURE
If rows fail on more than one module, the monitor will sequence through the
Module Numbers and display the corresponding row numbers for 2 seconds
on each module. For example, if Module 1, Row 8 and Module 2, Row 5 fail,
the following display sequence will occur and loop.
Figure 17
Example of Multiple Row Failure
The looping of the modules with failed rows will continue unless the alarm is
cancelled. If this occurs, the display will scroll through each module as
before, but will illuminate the failed rows. If additional rows fail, the
operation will return to looping the new failures only. If a second alarm
cancel is performed, the display will again scroll through each module as
before, but will illuminate all row failures.
ALL ROWS FAILURE
If all rows fail, which is common when the planter is lifted and no lift switch is
installed, the Module Display will output an “A”, all rows will light, and the
alarm will chirp.
Alarm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Alarm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16