Dibo JMB-E, Руководство пользователя

Страница: 79 / 115

JMB-E : REV 0 DiBO n.v. 79
6.2.4. Control
/refreshing the reduction oil
- oil level
Check for each use the machine the oil with the oil level glass.
Oil must stand right with the sign of the oil level glass, if the this case is not, oil tops up until the sign.
If oil looks forward to there milky, consult directly the DiBO technicians. To refresh oil, as follows work goes:
- Unbolt the drain plug below the reduction gearbox.
- Catch all oil in a barge and remove oil like further described in the guide.
- Force up the drain plug there and top up the oil in the breach to the upper part to on the mark line.
- Recommended oil: 1.836.015.
6.2.5. Maintenance petrol engine
For maintenance activities to the engine we reccomend to consult the supplied instruction manual for use of
the engine. Recommended oil: 1.836.005.
! While the engine is still warm, change the engine oil !
Attention: if the engine is tipped during maintenance, the fuel tank, if mounted on engine, must be empty
and the spark plug side must be up. If the fuel tank is not empty and if the engine is tipped in any other
direction, it may be difficult to start due to oil or gasoline contaminating the air filter and/or the spark
plug. Disconnect the spark plug wire/ battery at negative terminal before starting maintenance activities.
Avoid leaking of fuel (fire hazard)!
6.2.6. Maintenance diesel engine
For maintenance activities to the engine we reccomend to consult the supplied instruction manual for use of
the engine. Recommended oil: 1.836.055.
Parts to be serviced (maintenance interval, see manual): change/check oil, replace internal oil filter,
clean/replace air filter, replace fuel filter.
! While the engine is still warm, change the engine oil !
6.2.7. Cleaning of the water filters
Clean the water filters regular and remove possible dirt.
6.2.8. Maintenance at expense/DiBO technicians
For further maintenance we advise to contact your DiBO distributor concerning a maintenance contract.
The maintenance applies to normal company circumstances.
At heavy circumstances you can communicate this so that can be taken into account.
Supplement documents:
Control manual
CE- certificate
Other manuals
Electric plan
Remarks:
It is recommend the preventive maintenance to carry out by a competent DiBO- service technician accord-
ing to this maintenance diagram, to be able to remain use the machine up to maximum and also to be able to
claim the guarantee conditions.
To be able to guarantee a good and regular maintenance, we advise the owner/user at strongest to make an
appointment with DiBO against reaching the given up company hours, concerning a maintenance turn.