EN
T U R N O F F
DiBO 22
Turn off
When you interrupt or stop the cleaning activities, be sure to bear in mind the
following instructions in order to be able to switch off the cleaner in the right
way.
LANCE AND SPRAY GUN
Put the main switch on
OFF
when finisch with spraying activities. Operate the
spray gun until there’s no pressure anymore present in the hoses. Uncouple the
lance and put it away. Close the water supply. Roll up the high and low pressure
hoses.
CLEANER
Drain off the water from the supply tank.If necessary, clean the water filter(s).
Slightly clean the cleaner with a tissue. Close the protection cover. Hold the
manual and the ignition keys within arm’s reach. Store the cleaner in a dry
and frost free place at a horizontal and stable subsoil. Press the wheel clip
protections (brakes) on the swivel castors.
WATER OUTLET
See chapter
“Safety – general warnings” on page 9
ENVIRONMENTALLY SAFE DISPOSAL OF USED FLUIDS
No fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed
randomly because of the environment! So make sure, if you are user, that the
applicable local guidelines for environmentally friendly disposal of these fluids
(without soil pollution) are complied.
BURNER COOLING
If the cleaner is used with hot water, it is essential to turn off the boiler and
circulate cold water until the water output has reached an ambient room
temperature, to prevent or minimize limescale deposits in the circuit.
TRANSPORT
Let bij transport op het volgende: houd de machine tijdens transport zoveel
mogelijk horizontaal, hiermee voorkomt men dat er olie uit de pomp lekt.
Laad de machines met behulp van een heftruck, hydraulische laadvloer of een
takel. Sjor de machines (indien nodig) degelijk op de laadvloer vast.
STORAGE AT FREEZING TEMPERATURES
Freezing water in the cleaner can destroy parts of the cleaner. Therefore, drain
the water at frost temperatures. Replace the water supply hose by a short piece
hose connected to a pressure vessel or pre- pressure pump (max. 3 Bar) and
hang its end in the antifrost tank, so the machine can be filled with antifrost.
product. Make sure the mixing valve is closed! Take the lance from the gun and
operate the machine. Spray until antifrost water flows out of the spray gun.
The machine is now filled with anti-frost, stop the machine.
Tip: Because the catch of the outgoing anti-frost
water, this can be re-used afterwards.
