EN
TuRn oFF
DiBO 18
Turn off
GENERAL
put the operating switch to
0: OFF
when you finish the spraying activities.
CHEMICALS TANK
Rinse everything with clean water, to remove chemicals out off the hoses, lance
and spray gun.pull the suction hose out of the chemicals tank and hang it in a
bucket with clean water. Seal the chemicals tank with a cap and store safely.
LANCE AND GUN
uncouple the lance and put it away. Close the water supply. Roll up the high
and low pressure hoses.
WATER OUTLET
See chapter
“Safety – general warnings” on page 9
PUT AWAY CLEANER
Clean when necessary the water filter. Check if the cleaner is stored frost proof.
Furthermore, it is recommended to empty the water from cleaner and
accessories, or to rinse with antifreeze.
Use the pull bar to move the cleaner, don’t use the
tube base support to move the cleaner!
ENVIRONMENTALLY SAFE DISPOSAL OF USED FLUIDS
no fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed
randomly because of the environment! So make sure, if you are user, that the
applicable local guidelines for environmentally friendly disposal of these fluids
(without soil pollution) are complied.
TRANSPORT
pay attention at transport to the following: keeps the machine as much as
possible horizontal while transporting, this prevents oil leaks from the pump.
load the machine using a lift truck, hydraulic loading platform or a hoist. lash
the machines (if necessary) solid fixed to the loading platform.
TRANSPORT AT FROST TEMPERATURES
Replace the water suction hose by a short piece hose and hang it with the end
in the anti frost, so the machine can suck in the anti frost product. Take the lance
from the spray gun and operate the machine. Spray until the anti frost flows
from the spray gun. The machine is now filled with anti frost, stop the machine.
Tip: by collecting the outgoing anti frost water, you can
re-use the anti frost product again afterwards.
