opERaTIon
EN
DiBO 17
MOUNTING INSTRUCTIONS REEL PACKET
at use van of the reel packet (option) you need to mount the reel grip and
connect the high pressure hose. Mount the reel grip through the bolt and
corresponding round head nut. Connect the high pressure hose by means of
tightening the hose coupling right to the high pressure coupling. See photo’s
below for clarification.
At use of reel(s) (optionally): always unroll the reel hose(s) completely
during spraying activities to ensure an optimal performance!
SCOPE OF APPLICATION
Efficient high pressure cleaning is achieved by following a few guidelines
combined with your own experiences. Each cleaning job is different and
specific, therefore contact DiBo for the best solution in your application sector.
• using cleaning products (if applicable): the surface to clean should be sprayed
so the product can act during some time (do not let it dry!) before cleaning
with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
always follow/consider the safety instructions of the used product!
• Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and
rinsing.
• hot water (high pressure) cleaning (if applicable): the cleaning effect will be
such improved through increasing the temperature (set the temperature
experimentally according to the application).
• Cleaning via lance with rotating head (if applicable): cleaning method to
remove tough layers of dirt.
• Cleaning using a steam lance (if applicable): this steam function (by
overheating water) is used in ‘sensitive’ cleaning applications (eg: damage
sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by
using steam.
Please note: this application has high cleaning
temperatures and requires various safety measures!
Intended use: this pressure washer has been developed for use in various
professional applications (eg: building technology, cleaning technology,
industrial, transport sector, ...).
