Dibal DPOS400 SERIE Скачать руководство пользователя страница 62

Страница: 62 / 72

Test y Ajustes

4.42 DIBAL Terminal protocol

Protocol

Cash Register

Scale

9APPPPPPCC

/ NAK

98PPPPPPCC

/ NAK

9BSWWWWWPPPPPPEIIIIIICC

/ NAK

Where:

9A:

0x38h y 0x41h

98:

0x38h y 0x39h

PPPPPP:

6 characters for price.

Checksum, login add (XOR) of all previous characters.

0x0Dh

0x0Ah

0x06h

9B:

0x39h y 0x42h

Weight status.

0: 0x30h

Correct.

1: 0x31h

Error.

WWWWW:

5 characters for weight.

Amount status.

0: 0x30h

Correct.

1: 0x31h

Error.

IIIIII:

6 characters for amount.

NOTE:

When the key (undefined) is pressed the scale sends price request frame with displayed price. If the
scale receives an

ACK

, then it will receive a frame with the price. If the scale receives a

NAK

instead

ACK

, it will send again the price request frame.

The scale responds with a

NAK

if it receives the price or the checksum erroneous.

When the total key is pressed the scale waits until it has a stable, positive within range weight to send
the weight, price and amount frame.

If there is not weight (00.000), the scale does not send the price, weight and amount frame when the
total key is pressed.

If the amount overflows, the scale does not send the price, weight and amount frame when the total
key is pressed.

If the scale receives a

NAK

instead

ACK

, it will send the appropriate frame (

9APPPPPPCC

9BSWWWWWPPPPPPEIIIIIICC

Between different requests the weight must vary at least 20 steps or pass through zero, otherwise the
scale will not respond.

The scale takes into account the minimum weight adjustment. If this adjustment has the value 1, the
scale will not respond if the weight is lower than 20 steps.

Contact with the technical support department for more information.

Содержание DPOS400 SERIE









































































Результаты поиска

Содержание DPOS400 SERIE

Отзывы:

Похожие инструкции для DPOS400 SERIE

Бренды по названию

Популярные бренды

Dibal DPOS400 SERIE, Руководство по испытаниям и настройкам

Результаты поиска

Содержание DPOS400 SERIE

Отзывы:

Похожие инструкции для DPOS400 SERIE

Бренды по названию

Популярные бренды